An ADA-style or aging-in-place bathroom remodel in Austin typically runs $9,000 to $18,000 for a shower-conversion package, $18,000 to $30,000 for a full primary-bath accessibility remodel, and $30,000 to $45,000-plus for a gut-renovation that widens doorways and reworks the lighting. Most projects take four to seven weeks start to finish. The number that lands on the estimate depends on three things: what the shower becomes, how much blocking goes in the walls, and whether the doorway and vanity change.
This post walks through what the three price tiers actually include, what drives the number up or down, where the Austin-specific details change the math, and how to decide which tier is right for your bathroom.
The three scope packages, in dollars
1. Shower-conversion package — typically $9,000 to $18,000
Replace a tub or step-in shower with a curbless (zero-threshold) walk-in. New waterproofing, new linear drain, new tile, a glass panel or weighted curtain, a hand-held wand on a slide bar, a built-in or fold-down bench, grab bars, and in-wall blocking so additional bars can go anywhere later. Three to four weeks on site. Keeps the rest of the bathroom.
What drives the price inside this range: the tile selection (ceramic subway at the low end, large-format porcelain or hand-cut mosaic at the high end), whether the subfloor needs reinforcement for the curbless slope, and whether the plumbing has to move. A straight tub-to-shower swap at the same location is usually at the low end. Relocating the shower head or drain moves it toward the top.
2. Primary-bath accessibility remodel — typically $18,000 to $30,000
Everything in the shower conversion, plus a new comfort-height toilet (17 to 19 inches rim-to-floor, the ADA standard), a new vanity (optionally roll-under), new lever faucets, new slip-resistant flooring, improved lighting, and in-wall blocking throughout. Four to six weeks on site.
This is the tier where modern accessibility finishes make the biggest visual difference. Satin brass grab bars that read like towel racks, a comfort-height toilet that looks like a European fixture, a frameless glass panel on a curbless walk-in — none of it looks “institutional” to a visitor. For most homeowners planning around aging parents or a mobility change, this is the sweet spot.
3. Full accessibility gut-renovation — typically $30,000 to $45,000+
Everything in package 2, plus a widened doorway to 36 inches of clear opening, electrical and lighting rework, possible wall relocation for wheelchair turning clearance (60 inches of turning radius or a 30-by-48-inch clear floor space), and finish-level upgrades in stone, tile, or millwork. Six to eight weeks on site. This is where most clients land when they are planning to stay in the house for the long run.
Above $45,000 you are in luxury-finish territory: natural stone slabs, custom millwork, zero-threshold shower-to-bedroom paths, heated floors, and smart-home-integrated lighting and fixtures. All of that is available; none of it is required to meet accessibility standards.
What’s actually driving the price
The shower. A curbless walk-in is the single biggest cost line and the single biggest return. Done right, water stays in the shower without a curb because the subfloor slopes and the linear drain handles the volume. Done wrong, water migrates. The waterproofing membrane, the pre-slope, and the drain itself are where the real money goes — not the tile on top of them.
In-wall blocking. This is the cheapest decision a homeowner will make for the next twenty years and the one that is almost always worth it: ask the contractor to install plywood blocking in the wet-wall and the long shower wall so a grab bar can be installed anywhere later. The plywood costs almost nothing during the remodel; retrofitting it later means tearing out tile. Build it in now.
The doorway. A 36-inch clear opening is the standard for wheelchair clearance. In an existing home, that often means a 32-inch door framed into a wider rough opening, or a “swing-clear” offset hinge that gains two inches without reframing. Reframing a doorway means moving framing, drywall, and sometimes an electrical switch, so it is a meaningful line item.
The flooring. Slip-resistant tile with a Dynamic Coefficient of Friction (DCOF) of 0.42 or higher is the industry standard for wet areas. Smaller tile means more grout lines, which means more grip. Natural stone is beautiful but can be slick when wet; porcelain is usually the honest choice for a bathroom floor.
The lighting. Three-zone lighting — general ceiling, task at the mirror, low-level nightlight — is a bigger safety upgrade than most people realize. Most falls at night are a lighting problem, not a mobility problem.
Austin-specific details that change the math
Permits in Austin depend on what moves. If the shower conversion changes plumbing fixture location or electrical load, a permit is required and the project goes through city inspection. A straight tub-to-shower swap at the same drain location often does not require one. Each city in the metro has its own rule — Austin, Pflugerville, Round Rock, Leander, Liberty Hill all run their own permit offices — and we check the specific requirement for your address during planning, not after.
HOA review applies in many Austin-metro subdivisions, especially newer master-planned communities in Pflugerville, Round Rock, and Georgetown. Interior bathroom remodels usually do not need HOA sign-off, but if any exterior change is involved (a wider doorway requiring a new exterior door, for instance), that review process is a two-to-four-week window to plan around.
What is not in the price
Clear about the exclusions up front saves friction later. A typical ADA bathroom estimate does not include: structural changes required to add a second-story bathroom, elevation certificates in flood-prone areas, extensive asbestos or mold remediation if discovered in demo, or occupational therapy consultation (that is a separately contracted service, usually $150 to $300 per hour, and often worth it — see the next section). Site conditions found during demolition can add 5 to 15 percent on an older home.
When “ADA” is actually required
The Americans with Disabilities Act is a legal standard for public accommodations — businesses, government buildings, apartment common areas. It does not apply to private single-family homes. In a home, what matters is the ANSI A117.1 residential accessibility standard and good practice. “ADA-style” or “ADA-compliant” are informal terms homeowners use for a bathroom designed to the same specs; the specs come from ANSI A117.1 and from the lived experience of the person who will use the bathroom.
For a multi-unit property, duplex, or any home-based business that serves the public, the picture changes. Talk to the municipality early.
Insurance, Medicare, VA grants — what actually covers this?
Traditional Medicare does not cover home modifications. Some Medicare Advantage plans and the Texas STAR+PLUS waiver cover certain accessibility work for Medicaid-eligible households. The VA has a Home Improvements and Structural Alterations (HISA) grant for veterans with service-connected disabilities — up to $6,800 at the time of writing. Occupational therapists sometimes document medical necessity for insurance submission.
We don’t bill insurance directly. What we do provide is the itemized estimate, scope of work, and photo documentation your plan or OT will ask for.
When to bring in a CAPS consultant or OT
A CAPS (Certified Aging-in-Place Specialist) is a credential from the National Association of Home Builders. CAPS-certified contractors, designers, and occupational therapists are trained to design around specific mobility needs. For a straightforward tub-to-walk-in-shower conversion with grab bars, a CAPS consult often isn’t necessary. For a remodel designed around progressive mobility change — Parkinson’s, MS, post-stroke recovery — it almost always is.
Our team isn’t CAPS-certified. For projects that need that specific expertise, we work alongside CAPS-certified OTs and designers whom clients have engaged, and we recommend bringing one in for any remodel where mobility needs are complex or progressive.
Questions people ask us
How long does the whole thing take? Depends on scope: three to four weeks for the shower-conversion package, four to six for the primary-bath remodel, six to eight for a full gut. Demo is two to three days. Waterproofing and inspection is roughly a week. Tile is a week. Finishes and plumbing trim is a week.
Can we live in the house during the remodel? Yes, with planning. We seal the work zone with zip-walls and HEPA filtration and sequence the work so a usable toilet and shower stay available on the property. In a one-bath house there will be a few shower-less days; we tell you which days in advance.
Will the bathroom look institutional? No. Modern accessibility finishes read as premium design. A satin-brass grab bar looks like a towel bar. A comfort-height toilet looks European. A curbless walk-in shower is a design trend before it is an accessibility feature. If the bathroom passes as a spa remodel to a houseguest, you have done it right.
Should the person who will use the bathroom be involved in the design? Yes, and before we drill. We mock up grab-bar locations with painter’s tape and have the person who will use the bathroom try the heights, reaches, and bench placements standing and seated. An extra hour at this stage is worth far more than rework later.
What to do next
If you’re planning around a parent moving in, a mobility change, or long-term aging-in-place, the first conversation is free. We’ll walk the bathroom with you, ask about the person who will use it, and give you an itemized estimate inside a week. See our ADA & Aging-in-Place Bathroom Remodeling page for the full scope list, or call (737) 321-5505.
